At Reata, we treat new product introduction (NPI) and long-term production as two separate stages of manufacturing, with different priorities and processes. During NPI, our goal is to reduce uncertainty and learn as much about the part as possible. Once we prove the process, the focus shifts to controlling variation and improving efficiency over time.
This distinction is critical. A new part may still have unanswered questions about tooling, fixturing, inspection, cycle time, tolerances, or even how requirements should be interpreted on the shop floor. A part that has been produced thousands of times should have answers to those questions built into the manufacturing process.
NPI Requires Learning and Discovery
A new part comes with unknowns. Even when the drawing is complete, there are questions that may not have answers until manufacturing begins. Reata starts addressing those questions during quoting. Our pre-quote questionnaire helps us understand customer expectations and where the project may be headed, allowing us to tailor our approach accordingly.
Once a project moves forward, our new part process looks closely at questions such as:
- Is the routing appropriate?
- Is the selected machining center the right fit?
- What fixturing method makes the most sense?
- Do the tooling choices work, or is special tooling required?
- Which dimensions will be difficult to hold?
- What inspection methods make sense?
- What cycle times should we expect?
- What information does the operator need to run the part correctly?
These questions can uncover important details that aren’t always apparent from a drawing.
A Successful NPI Process Surfaces Problems Early
It feels contradictory to say we’re actively searching for issues, but if anything is going to go wrong, it’s best that it happens during the NPI phase.
Difficult fixturing, ambiguous requirements, challenging inspection methods, difficult-to-hold dimensions, and other issues all provide useful information. Finding those issues during NPI gives our team the opportunity to address them before the part reaches higher-volume production.
In a way, the first parts we produce function almost like an engineering experiment. The entire team works to understand what the part requires and how to produce it consistently. Just as important, we capture that knowledge so problems don’t fall through the cracks.
Sustaining Manufacturing Is About Controlling Variation
Once a process has been proven, the manufacturing challenge changes. The team knows how to make the part, and now the focus is repeatability. This means establishing appropriate inspection methods and making sure operators have the information they need without requiring constant intervention from engineering and programming.
Additionally, a mature process should become easier to run over time. The 500th lot shouldn’t feel exactly like the fifth lot. By then, the team should have learned from earlier production runs and incorporated those lessons into the process. If a mature part continues getting harder to manufacture, that’s a signal that something needs attention.
Proven Processes Create Opportunities for Automation
Once a process is stable, Reata can take advantage of equipment and automation that are particularly valuable for repeat production.
Our horizontal machining centers with pallet systems and Integrex machines with robotic tending can support repeatable processes with standardized workholding, predictable tooling, and unattended machining. Those capabilities become much more valuable once the team understands the process.
The same principle applies to tooling and process monitoring. Once we understand how a tool behaves during production, we can make better decisions about tool usage and wear.
Quality Evolves with the Part
Inspection shouldn’t necessarily look the same throughout a part’s entire manufacturing lifecycle. During NPI, first-piece validation and detailed inspection can help the team understand whether the process is producing the intended result. As the process matures, inspection can evolve based on what has been proven to be under control.
NPI vs. Sustaining Processes: Where Reata Fits
NPI and sustaining manufacturing are connected, but they require different thinking.
- NPI is where Reata asks questions, tests assumptions, exposes problems, and learns what the part needs.
- Sustaining is where that knowledge becomes a repeatable system, supported by standardized processes, quality controls, automation, data, and documentation.
Our manufacturing software and data systems, including Paperless Parts, Fulcrum, Datanomix, scheduling tools, dashboards, automated vendor follow-up, and our customer portal, help connect that information across the business, so our processes can evolve as the part does.
Partner with Reata to build processes that become more efficient and repeatable with every production run.