FLEXIBLE • AFFORDABLE • PORTABLE • EASY TO USE • RELIABLE • NON-MAGNETIZING
ConeMount
Distributors
Bearing Heaters
Looking for more details on these products? Download the Spec Sheet Here.
On automatic models bearing temperature is monitored with thermostat preset at 250°/121°, which is placed on the bearing inner race. When the inner race reaches 250°/121°, the unit and control light shut off – the bearing is ready for mounting.
Model Super – BH-02-S
CARRYING BAG SOLD SEPARATELY
Bearing temperature is monitored with a 250°/121° temperature indicator crayon, which is used to mark the bearing inner race. When this mark melts, the bearing is ready for mounting.
Light Duty ConeMount Bearing Heater, 3/8″ – 5 3/4″ (10 – 145 MM), 10″H X 10″W, 725 Watts
Model B – BH-02-B
Light-to-Heavy Duty, 3/4″ – 5 3/4″ (20 – 145 MM), 10″H X 10″W, 725 Watts
Model B – BH-02-C
CARRYING BAG SOLD SEPARATELY
Laser Alignment Systems
- Reduces vibration and belt noise
- Prolongs belt and pulley life
- Reduces down time and energy costs
- FAST and EASY to use
- Shows angular, parallel, and offset simultaneously
- No training required
- One-person operation
- More accurate and efficient than any other tool or conventional method
- Uses proven reflected RED laser beam technology
- Used for shots up to 6 ft. (1.9 m) or better
Part #KX-2500
- Green laser is 10X brighter than red
- Reduces vibration and belt noise
- Prolongs belt and pulley life
- Reduces down time and energy costs
- FAST and EASY to use
- Shows angular, parallel, and offset simultaneously
- No training required
- One-person operation
- More accurate and efficient than any other tool or conventional method
- Uses proven reflected GREEN laser beam technology
- Used for shots up to 15 ft. (4.6 m) or better
Part #KX-3500
- Reduces down time and product waste due to misalignment of rolls
- Pays for itself quickly
- No training required
- Facilitates more frequent roll checks
- Uses our proven patented reflected laser beam technology
- Increases production with proper alignment of rolls
- FAST and EASY to use
- One-person operation
- Compact design that fits into small spaces
- Bright GREEN or bright RED laser lines
The RollCheck® Green laser alignment system for parallel roll alignment is lightweight, compact and durable. The system can be attached to just about any size roll with the supplied straps. We use our proven reflected laser beam technology for maximum angular resolution, thus providing you with the most reliable and accurate visual reading. Using the latest in Green laser diode technology makes our green laser line 10x’s brighter to the operator than a red laser line.
- Designed for medium to large machines
- 1 inch or 25mm to 8 foot or 2400mm roll diameters
- Shots greater than 10 feet or 3 meters
- Bright GREEN laser lines
- Rechargeable lithium ion batteries
Part #SX-5150
The RollCheck® MINI laser alignment system for parallel roll alignment is lightweight, compact and durable. The system can be attached to a roll up to 4” (101 mm) in diameter with the supplied straps. We use our proven reflected laser beam technology for maximum angular resolution, thus providing you with the most reliable and accurate visual reading.
- Designed for small machines
- 1 inch or 25mm to 4 inch or 101mm roll diameters
- Shots up to 4 feet or 1200mm
- Bright RED laser lines
- Rechargeable lithium ion batteries
Part #SX-4150
ConeMount Accessories
The Sonic Tension Meter provide you with accurate results by analyzing harmonic properties and by measuring the vibration frequency, you will be able to determine if your belt tension is correct. This device works on any type of synchronous belt drive system, including V-belt drives.
- Consistent, accurate tension readings every time
- Compact and light
- Easy to use
- LCD screen with black light
- Output readings measurable in hertz, pounds or newtons
- Improved frequency range from 10 – 5000 hertz
- 20 memory registers for belt constants
- Gates product number 7420-0507
Ensure precision and reliability with our Sonic Tension Meter Calibration service, delivering accurate readings and optimal performance for your equipment. Click here to request a quote.
Part #7420-0508
Powerful magnetic brackets hold the PulleyPartner firmly in place.
- Includes ½ and ¾ inch adaptors
Part #KX-1050 (SET) Offset Bracket Kit
All ConeMount Bearing Heater units weigh 7lbs. or less.
The sturdy ConeMount Transport Bag makes moving your unit from site to site even easier.
Part #CM-BAG
Use with ConeMount Bearing Heaters
(188°F/87°C, 213°F/101°C, 225°F/107°C, 250°F/121°C, 325°F/163°C, 400°F/204°C, 500°F/260°C)
Part #188F, 213F, 225F, 250F, 325/f, 400F, 500F
Proper Installation means longer life
ConeMount bearing heaters can accommodate inner-race diameters from 3/8 to 18 inches, which means you can service just about anything in your facility. It takes between 1 and 12 minutes – depending on bearing size – to reach optimal temperature, a fraction of the time using other methods. By heating the bearing, the diameter increases enough to easily slip the bearing onto the shaft without hammering or using a press. When the bearing cools, it is flush, square and tightly attached to the shaft. Improper installation is the leading cause of bearing failure. Methods such as blow-torching can distort the bearing and oil baths cannot be used on sealed bearings. Installing bearings with ConeMount will lower cost, reduce chatter and vibration, shorten downtime and increase the life of your equipment.
Manufacturing Resources
Convenient repair at the work site
On the manufacturing floor, there are many machines that use press-fit bearings. CNC machines, conveyors, pumps, fans and almost anything with an electric motor will eventually need bearings replaced. Induction heaters are bulky and heavy, often requiring the transport of a 250-degree part across the shop floor. ConeMount bearing heaters are lightweight (less that 7 pounds) and portable, so you can perform preventive maintenance and repairs anywhere.
Keep your equipment running .
Everything you need to properly install press-fit bearings is in the transport bag
Keeping Your Fleet on the Road
Downtime is expensive. Not only is your equipment idle, you’re also paying personnel to make repairs.
So time literally is money.
ConeMount bearing heaters are lightweight, portable and fast, allowing repairs and preventive maintenance to be performed at the vehicle. Induction heaters are large, bulky and heavy creating the temptation to transport 250-degree parts across the shop floor to the vehicle. Using a ConeMount heated at the job site means uniform heating and quick transfer from heater to shaft. Everything you need to properly install press-fit bearings is in the transport bag, so you can keep your fleet running with minimal downtime.
The Right Tool for the Job – Wherever It Is
Mobile service technicians encounter many repair calls caused by failed bearings. These can be in HVAC units, elevators, conveyors, supply fans and pumps. Almost anything with an electric motor will eventually need bearings replaced. Your customers want repairs made quickly, and the work site can be on a hot roof, in an elevator shaft or in a confined space.
ConeMount bearing heaters work anywhere there’s an electrical supply.